Page 5 - Hub-4 Magazine Issue 57
P. 5

Featured story
The 1200mm/48” wide variable speed main conveyor has the capability to handle up to +600 mtph of materials depending on the feed material and working angle of the machine. The impressive 9.8m / 32’ 2” maximum discharge height provides a maximum conical shaped material stockpile capacity of 1735m3/2269yd3.
With an average fuel consumption of approximately 8.5 l/hr the TF-75L reduces the need for doubling handling of materials and also the requirement to operate secondary equipment such as loaders on site.
By replacing these supplementary pieces of equipment with a TH-75L low level feeder, operators will immediately benefit from reduced operational, maintenance and labour costs and lower the overall cost per tonne. We estimate that these savings can be up to 80%, a significant immediate saving for operators who can either redeploy their loader or simply avoid the investment altogether.
As with all Terex Finlay crushers, screeners and conveying equipment, the TF-75L low level feeder has been designed for ease of movement between job sites, ease of redeployment on site and rapid set up and tear down times so that the machine can be to put work in less than 15 minutes from transport mode.
For further details on the Terex Finlay product portfolio and services please visit our website July/August 2019 - Issue 57
| p5 |

   3   4   5   6   7