Page 71 - Hub 4 Issue 60

Crushing & Screening
Wayne Brennan – QM, commented, “Following a demonstration of an older 694 we found that the performance was so impressive, and the product was so much cleaner it wasn’t a difficult decision to make. It provides a totally consistent better quality of material and it has proved to be ‘miles better’ than anything we have experienced before!“
Processing duties:
Material is extracted from the face by a Hitachi 470 fitted with a breaker as no blasting is allowed due to the proximity of an adjacent highway. Working in area A, material is then fed by loading shovel into an impactor and crushed and then fed onto a Terex Finlay 683, which scalps off the oversize. Working in tandem the 683 feeds the new Terex Finlay triple- deck 694+, stockpiling 50/20 and 10mm aggregates plus a lime.
Speedy and efficient servicing:
All the Terex Finlay equipment is comprehensively covered by an extensive fleet of modern, fully equipped Molson service vans and a team of highly experienced engineers who are
well positioned to resolve any equipment problems with speed and efficiency.
Terex Finlay 694+
Part of the 6 Series range of Finlay tracked inclined screens the 694+ is a versatile, high capacity, robust and durable machine that can be operated in a wide range of primary and secondary screening applications and is suitable for processing and sizing aggregates, minerals and recycling applications.
With ‘best in class’ production levels, set up time and ease of operation, the Terex® Finlay 694+ is undoubtably the industry’s leading tracked mobile inclined screen. With a triple deck 20’ x 5’ (6.1m x 1.525m) screen box with full catwalk access it is the largest and most accessible in its class.
A high capacity belt feed hopper is available with remote tipping grid or double deck vibrating grid. The triple deck screen configuration provides three full sized 20’ x 5’ (6.1m x 1.525m) screens which provide ultra-efficient screening capacities even at small aggregate sizes.
A combination of quick wedge tensioning, convenient access holes, and hydraulic tensioning on the bottom deck ensure mesh set up and change out times are
kept to an absolute minimum.
Featuring four stockpilers, an innovative hydraulically folded fourth conveyor allows simple
adjustment with variable tilt and slew discharge for re- circulation or stockpiling of finished material. Washing
equipment can also be fitted to the screen-box if required between 18 degree and 30 degree.
www.hub-4.com January/February 2020 - Issue 60
| p71 |