Page 19 - Hub-4 Magazine Issue 73
P. 19

 Washing &
Screening
 Wash-bear® from the Orba Group Ltd
LONDON-head quartered, but covering the whole of the UK and Ireland, Orba Group Ltd specialises in the supply of machinery solutions for recycling, construction, demolition, and waste management as well as providing bespoke solutions for these industries.
The company is also the official UK/Ireland dealer for wash-bear® machinery, manufactured by Moerschen GmbH, which are German designed and engineered, and built to the highest quality.
The processing involved in breaking materials down to RC material is part of the everyday business of the construction and material handling industry. The wash-bear® has been designed to service businesses in these sectors through highly efficient technology for separating lightweight materials from building rubble. The wash-bear® works according to the proven floating-sinking principle and reliably and cleanly separates light materials such as wood, artificial and insulating materials from the minerals. With the wash-bear® all mineral substances can be cleaned, but most of all, RCL building materials.
Nearly 100% material separation
In addition to its process efficiency, which ensures almost 100% separation of contaminants and mineral fractions, the wash-bear® also scores well thanks to its high levels of process effectiveness. This results from the economical handling of the resources to be used through the robust, maintenance-free design of the system technology. The closed system consumes whatever water adheres to the discharged mineral, meaning that in a 10-hour shift 4-8 m3 is used in practice, whereby the inlet is controlled automatically by floats. This technique avoids the build-up of chemicals in the eluate.
Low energy requirement
The water used is absorbed into the basic moisture of the RC material. What comes out with regard to the chemical composition, at most, is what was discarded by the rubble in the system. The economy of the system continues with the energy expenditure, which at 8-15kW/h during operation is significantly lower than an air sieve with a similar performance. Nevertheless, the drive power is enough to start the wash-bear® in full load. Thanks to its compact dimensions, the wash-bear® can be easily integrated into the overall process chain even on narrow construction sites. By using the (optional) ‘clean extension,’ the wash-bear® becomes a powerful wet-pro-cessing system for the removal of fine fractions, e.g., when washing track ballast.
The current generation of systems is available as wash-bear® 2.0 in three models, which are designated as the PRO range depending on size. Their hourly through-put rates range between 80 t/h and 190 t/h - depending on the input. All types are designed with a mobile lift hook for easy transport.
The wash-bear® your advantages
In effect, the wash-bear® from the Orba Group Ltd is a highly efficient mobile piece of equipment for separating lightweight
materials from building rubble with extremely low operating and maintenance costs. There is no accruing waste water, no sediment residues and it is flexible enough to provide bespoke solutions for special applications, as well as being easily integrated into existing systems, meaning that manual sorting is no longer necessary.
For further information, please contact: www.orbagroupltd.com
    www.hub-4.com March-April 22 - Issue 73
 | p19 |
  

















































































   17   18   19   20   21