Page 36 - Hub-4 Magazine Issue 78
P. 36

 Aggregate
 Crushing & Screening Feature
PowerX Equipment completes Crushing and Screening Installation
PowerX Equipment recently completed an impressive plant installation for a customer in North Wales.
The customer required a plant to process 500 tonnes of material per hour into the main crusher with up to 300 tonnes per hour going into the secondary cone crusher. One of the main requirements was to keep power to a minimum with all drives being inverter driven to reduce the peaks. To improve the end product, 0-6mm of dust was to be removed in three areas of the operation.
PowerX Equipment designed the plant to the exact customer specifications and installed the best equipment for the job, including two Terex Cedarapids TG cone crushers. The TG320 Extra Coarse Cone Crusher was installed as the secondary crusher with a TG320 Medium Fine acting as the tertiary crusher. Cones were installed to produce less dust and more 10mm material compared to a secondary impactor. The two TG320 cones have interchangeable spares, and utilise the same base mount, drive train and power rating. It is the ideal choice for secondary or tertiary applications. It can also be utilised in a control fed sand and gravel primary application.
The range of bronze bushing Terex Cedarapids TG Series cone crushers are the latest addition to the world leading Terex
Cedarapids Cone Crusher Range. These impressive cone crushers can be easily and efficiently set up to perform and deliver the best cost per ton cubicle product by selecting the optimum crushing cavity and eccentric throw to suit the application requirements. From a coarse secondary right through to fine quaternary, the TG series cone crushers will consistently exceed all performance expectations.
The advanced automation control system, fitted as standard on all TG Series Cones, improves performance and cone safety. With its user-friendly interface and advanced technology the control system will continuously monitor the cone’s operational parameters and make the necessary adjustments to ensure consistent peak performance.
The TG cone range can also be configured with a secondary upper frame. The TGS configuration can accept a 65-80% larger feed in size compared to all other types of cones in the same power rating, and the steep angled head design accounts for an increased throughput in capacity and the ability to sustain an on/off feed. The consistent feed in opening, through the full wear life of the liners, results in no reduction in maximum feed size and limited fluctuation in output gradings.
 | p36 |
www.hub-4.com January/February - Issue 78
    






















































































   34   35   36   37   38