Tarmac and Align trial innovative low carbon concrete

Tarmac has demonstrated and tested an innovative new low carbon concrete solution with Align, the joint venture delivering the Central 1 (C1) section of HS2 Phase One, the new high-speed rail line in the UK.

The new low carbon concrete has a carbon footprint following industry BSI PAS2050 calculation rules which equates to a 62% reduction in CO2e per cubic metre of concrete compared to standard CEM I concrete, meeting the same specification in the same raw materials.

With all aspects of concrete production and supply and no carbon off-setting applied, the material delivers an actual footprint of 133kg/m3 CO2e representing a saving of 220 tonnes CO2e for every 1,000 m3 produced.

Align provided applications for early demonstration and testing at full scale using one of the three Tarmac concrete batch plants at its Chalfont Lane construction site in Hertfordshire.

Tarmac and Align have a common goal of working towards net zero carbon construction and this new concrete, which is only recently available following extensive laboratory design, offers the potential to help achieve this objective.

A structural slab forming part of the new viaduct pre-cast factory and a vertical wall were poured. The mixes designed to Align concrete specification, exceeded expectations in both fresh and hardened properties, and showed that the new concrete can be produced in normal concrete plants and placed via mixer truck and by skip with tremie pipe.

This has demonstrated the potential to use very high ground granulated blast furnace slag (GGBS) contents in excess of 90%, as an alkali activated cementitious material conforming to BS EN197, the standard for cementitious materials allowed to be used in ready mixed concrete, to significantly reduce carbon emissions whilst still producing a quality finish and allowing normal construction and demoulding times.

Robert Gossling, Head of Commercial Engineering Solutions at Tarmac, said: “Against the backdrop of the climate emergency, this project underlines the clear benefits which can be unlocked when clients and contractors collaborate, in this case engaging to help understand and accelerate the adoption of this new low carbon concrete solution.”

“Together we’ve shown the material is fit for purpose in slabs and walls, with good repeatability and works with standard production and construction methods. This product is a great step along the UK concrete and cement industry’s net zero routemap, and the demonstration will help accelerate adoption of this new concrete.”

Daniel Altier, Project Director for Align, said: “It is a strategic imperative for Align, reflecting the priorities of our JV partners and in line with HS2 commitments to reduce carbon emissions by 50% and look for opportunities to improve our carbon footprint. The early results of this trial are very encouraging and highlight the benefits to be gained through close collaboration with our supply chain partners”   

Tarmac and Align will continue to collaborate by expanding the trial on other available areas of the C1 project and on development of low carbon concrete solutions.

Tarmac is currently providing concrete for the construction of Central 1 section of HS2 Phase One that is being delivered by Align. This includes a 21.6km section of high-speed rail infrastructure incorporating a 3.37km viaduct across the Colne Valley, a 16.04km twin-bored tunnel, and five vent shafts handling both intervention and tunnel ventilation facilities. 

Associated Businesses

  • Lutterworth, LE17 5 QF